ENGINEERING CONSULTING SERVICES
GEOTECHNICAL CONSTRUCTION MATERIALS ENVIRONMENTAL FACILITIES
™
ECSLIMITED.COM
FEATURE
Geoenvironmental Engineering, ASCE,
Vol. 128(12), pp 967-973.
• Brown, D. A., Muchard, M., and Khouri,
B., 2002. “The Effect of Drilling Fluid on
Axial Capacity, Cape Fear River, NC,”
Proc. of the Deep Foundations Inst.
27th Annual Meeting, San Diego.
• Bullock, P., Schmertmann, J., McVay,
M., and Townsend, F., 2005. “Side
Shear Setup. I: Test Piles Driven in
Florida,” Journal of Geotechnical and
Geoenvironmental Engineering, ASCE,
Vol. 131, No. 3, pp. 292-300.
• Camp, W.M., Brown, D.A., and
Mayne, P.W., 2002. “Construction
Method Effects on Axial Drilled Shaft
Performance” Geotechnical Special
Publication No. 116, ASCE, pp. 193-208.
• Fellenius, B., 2002. “Determining
the True Distributions of Load in
Instrumented Piles,” ASCE, Int’l Deep
Foundation Congress, GSP No. 116, Vol.
2, pp. 1455-1470.
• Ganju, E., Han, F., Prezzi, M., and
Salgado, R., 2020. “Static Capacity
of Closed-Ended Pipe Pile Driven in
Gravelly Sand,” Journal of Geotechnical
and Geoenvironmental Engineering,
ASCE, Vol. 146(4): 04020008.
• Hussein, M., McGillivray, R., and
Brown, D., 2012. “Knowledge is Bliss –
A Case for Supplemental Pile Testing
to Ascertain Fidelity,” Proceedings of
the GeoCongress, GeoInstitute, ASCE,
Geotechnical Special Publication 227,
Oakland, Calif., pp. 322-332.
• Karlsrud, K., 2012. “Prediction of Load-
Displacement Behaviour and Capacity
of Axially Loaded Piles in Clay based
on Analyses and Interpretation of Pile
Load Test Results,” Thesis for the degree
of Doctor Pilosophiae, Norwegian
University of Science and Technology,
Trondheim, 312p.
• Lam, C., Jefferis, S., and Martin,
C., 2014. “Effects of Polymer and
Bentonite Support Fluids on Concrete-
Sand Interface Shear Strength,”
Geotechnique, Vol. 64, No. 1, pp. 28-39.
• Lam, C., Troughton, V., Jefferis, S., and
Suckling, T., 2010. “Effect of Support
Fluids on Pile Performance – a
Field Trial in East London,” Ground
Engineering Magazine, Technical
Paper, October, pp 28-31.
• Mitchell, J.K., and Solymar, Z.V., 1984,
“Time-dependent strength gain in
freshly deposited or densified sand,”
Journal of Geotechnical Engineering,
ASCE, Vol. 110, pp. 1159-1175.
• Ruesta, P.F. and Townsend, F.C., 1997.
“Evaluation of Laterally Loaded Pile
Group at Roosevelt Bridge,” Journal of
Geotechnical and Geoenvironmental
Engineering, ASCE, Vol. 123, No. 12, pp
1153-1161.
• Saye, S., Brown, D., and Lutenegger,
A., 2013. “Assessing Adhesion of
Driven Pipe Piles in Clay Using
Adaptation of Stress History and
Normalized Soil Engineering Parameter
Concept,” Journal of Geotechnical and
Geoenvironmental Engineering, ASCE,
Vol. 139, pp. 1062-1074.
• Schmertmann, J.H., 1991, “The
mechanical aging of soils,” 25th
Terzaghi Lecture, Journal of
Geotechnical Engineering, ASCE, Vol.
117, pp. 1288-1330.
• Van Weel, A.F. 1988. “Cast-in-situ piles
– Installation methods, soil disturbance
and resulting pile behaviour”
Proc., 1st Int’l Geotech Seminar on
Deep Foundations on Bored and Auger
Piles, (Ghent, Belgium) Van Impe, ed,
Balkema, Rotterdam, 219-226.
• Vesic, A.S., 1977. “Design of Pile
Foundations,” NCHRP Synthesis 42,
Transp. Research Board, Nat’l Research
Council, 68p.
78 | ISSUE 4 2020 www.piledrivers.org
/ECSLIMITED.COM
